Short answer: swatch card or sample matching?

A dyeing job starts three ways: a colour spec, a sample sent for matching, or a standard colour picked from the mill's swatch card. Standard colours suit wide colour bands and repeat orders such as uniform basics; custom colour matching is the route when your brand or tender specifies the exact shade from the start.

What is a standard colour swatch card?

A standard colour swatch card is a card of fabric swatches the mill has dyed and approved in advance, each with a reference code or name. Ordering by code means everyone works from the same reference without shipping samples. International colour systems use the same model: the Pantone FHI swatch card is made on double-layered fabric, formulated for colour fastness and colour constancy, and every colour is backed by digital spectral data (the TC/TCX suffix marks the dyed-cotton reference).

Practical advantages for buyers:

  • Order with a single code — communication works across teams and countries
  • Repeatable reference — the card colour is the reference standard for every lot
  • Right for colours re-ordered every year, such as navy, grey, khaki and black for uniforms — reorder by the same code months later

Standard colour vs custom colour matching

  • Standard (from the card) — pick an existing colour; communicate by code; limited to the colours on the card
  • Custom matching — send a physical sample (or a spec/code) to the colour lab; a lab dip is made and approved for every job; matches shades outside the card; and the approved standard must be kept for re-orders

When to pick from a swatch card

  • Uniform tenders with a wide colour band (e.g. "dark navy tone") — pick the closest code on the card
  • Trader/wholesale lines sold by the roll — a standing standard range works faster
  • Re-orders of the same job — same code, matched against the standard the mill keeps
  • Jobs that need to settle colour quickly — a standard colour is the agreed answer

Remember: a standard colour does not by itself make a job cheaper or more expensive — price follows batch size per colour. Boonchuay Industrial runs batch (jet) and continuous dyeing (light to dark shades) to fit each volume, and a standard colour and a matched colour are both quoted on batch size.

When to send a sample for custom matching

  • Your brand has a proprietary shade that is not on the card
  • A tender or purchase document names an exact code or reference
  • Your customer holds its own colour standard, such as an old lot or an existing garment
  • Institutional colours — a department colour, a school colour, a company colour

A good standard is a physical fabric sample, not a photo — a phone photo shifts with screen and light, and works only as a starting reference.

How the mill's colour lab checks the match

When you send a standard, the colour lab will:

  1. Measure it with a spectrophotometer — reflectance values in numbers, comparable across runs and lots
  2. Compare it in a multi-source light booth — guarding against metamerism: colours that look matched under one light and not under another
  3. Dye a lab dip — a small sample that duplicates the mill's actual production process (see how a lab dip works)
  4. Assess the difference — visually per AATCC EP9 (visual assessment of color difference of textiles) and by the measured Delta E, calculated with the CIEDE2000 formula
  5. You approve the lab dip — only the approved lab dip becomes the standard for the production lot

BCI runs its own colour lab: spectrophotometer, multi-source light booth, an automatic lab colour dispenser, and batch and continuous lab dyeing that duplicate the factory process.

How to state the tolerance in your spec

  • State an agreed Delta E (ΔE) — the number is a buyer–mill agreement for the job, depending on shade and fabric surface; do not leave "looks the same" as the criterion
  • State how it is checked — measured on a spectrophotometer and compared under standard conditions
  • Keep the approved lab dip — both sides hold one copy for re-orders

FAQ

Q: Will a re-order months later match the original colour? A: Yes, if the standard is kept — the mill stores the approved lab dip/colour standard, and the new lot is dyed against it (see shade variation between lots).

Q: I gave a Pantone code — do I still need to send a sample? A: A Pantone code (e.g. TCX) is a good start, but the same colour number renders differently on different fibres and fabrics (Pantone recommends the material format closest to the end use — see the Pantone shade matching guide). The final standard for TC/TR work is the approved lab dip.

Q: How many lab dips until the shade matches? A: It depends on the shade — some match on the first dip; deep or special shades may take two or three.

Q: Does ordering several colours in one order hurt colour consistency? A: A dyeing mill handles many colours and lots as normal work — BCI keeps colour consistent across colours and lots with its own colour lab and lab dip programme.

Q: What is the minimum order? A: MOQ is negotiable — it depends on the dyeing route, the colour and the volume.

Talk to BCI

Boonchuay Industrial (BCI) is a commission dyeing and finishing mill with over 60 years of experience in Nakhon Pathom. BCI works from standard swatch card colours and custom matches from your sample, with a colour lab that tests to named methods (ISO, AATCC, JIS, Daimaru).

See commission dyeing from a dyeing mill, uniform fabrics or contact the BCI team

References