Short answer: how is TR fabric dyed
TR (polyester-rayon) fabric is a blend of polyester and rayon (viscose) — a regenerated cellulosic fibre made from wood pulp. Because one fabric carries two fibres, it cannot be dyed with a single dye class: the polyester takes disperse dyes (dyed at high heat) and the rayon takes reactive (or vat) dyes at a milder temperature. Running those two dye systems in sequence is what gives TR both the softness and drape of rayon and the shape retention and low shrinkage of polyester in a single fabric.
What TR is — and how it differs from TC
TR is a blend of polyester (T) and rayon/viscose (R). Its dyeing structure is identical to TC (two fibres, two dye classes), but it swaps the cellulosic fibre from cotton to rayon. The consequences:
- Rayon absorbs more water and is softer than cotton — so TR has a softer, smoother, more draping hand than TC
- Rayon has lower wet strength — it handles slightly less well under heavy wash-and-wear than TC
- Rayon shrinks more readily than cotton — so it needs tighter control in finishing (sanforizing)
- Rayon takes dye brightly (more amorphous region) — so shades run deeper and more vivid
Why TR needs two dye systems
One fabric, two chemically different fibres, so two dye classes are required (the same mechanism as TC — see How TC Fabric Is Dyed):
- Polyester — hydrophobic; takes disperse dyes, whose small molecules enter the fibre at high temperature (HTHP jet around 130°C, or continuous thermosol at 180–220°C) — disperse bonds to polyester mainly and not to cellulosic fibres
- Rayon (cellulosic) — takes reactive dyes (a chemical bond to cellulose at 60–80°C, fixed with alkali) or vat dyes
- The order matters: polyester is dyed first, because the disperse step uses very high heat — dyeing the reactive side first would destroy the reactive dyes
How TR fabric is dyed, step by step
- Pretreatment — desizing, scouring, and bleaching where needed; the polyester is heat-set first, or the fibre relaxes and the fabric loses its shape
- Polyester dyeing — disperse dyes at mildly acidic pH (about 5–6) with a dispersing agent and a levelling agent, in a jet (HTHP) or by continuous thermosol (padding then dry heat at 180–220°C)
- Reduction clearing — strips disperse-dye staining from the rayon side before the next step (used whenever the shade leaves the rayon stained)
- Rayon dyeing — reactive dyes (jet or pad-batch) at 60–80°C, fixed with alkali
- Soaping and washing — unreacted dye is washed out at heat with detergent, then rinse and dry
- Finishing — especially shrinkproofing (sanforizing) to lock in the final shape, which matters more for TR
Why TR is well suited to uniforms
Uniforms need a fabric that looks neat, feels soft, is comfortable, and stands up to frequent washing — TR delivers all of it:
- Rayon gives a soft, smooth, draping hand and good sweat absorbency (higher moisture regain than cotton) — comfortable to wear
- Polyester gives shape retention, low shrinkage, low wrinkling and easy ironing
- Combined, TR is a softer uniform fabric than TC that still holds up to repeated washing — a fit for office, hotel and work uniforms
- It comes in standard-to-heavier weights (not a lightweight fabric), which suits neat uniform work
TR vs TC, side by side
- Cellulosic fibre: TR = rayon (viscose) / TC = cotton
- Hand: TR is softer and smoother / TC is fuller and firmer
- Absorbency: TR (rayon) absorbs more water and sweat than the cotton in TC
- Wet strength: TR is slightly lower than TC — rayon is weaker than cotton when wet
- Shrinkage: TR (rayon) shrinks more readily — it needs tighter sanforizing control
- Typical use: TR = uniforms where a soft, neat hand is wanted / TC = uniforms where durability and firmness are wanted
How a dyeing mill keeps TR quality consistent
Because TR carries two fibres, holding one shade and a stable shape takes:
- A colour lab — spectrophotometer plus a multi-source light booth for lab dips
- Lab dyeing that mirrors the production route (batch and continuous)
- A buyer-signed standard sample held for inter-order comparison
- A locked recipe and process conditions
- ΔE from the spectrophotometer measuring every lot against the standard
- Testing to named methods and levels — e.g. wash (ISO 105-C06), crocking (ISO 105-X12), light (ISO 105-B02), dimensional change (ISO 6330 / AATCC 135)
- A 10-point system quality report for every lot
Boonchuay Industrial (BCI): commission dyeing for TR
BCI (Boonchuay Industrial) is a fabric dyeing and finishing mill with over 60 years of experience in Nakhon Pathom, Thailand. It takes TR (polyester-rayon) and TC — its core uniform fibres — as commission dyeing:
- The full route — pretreatment (desizing/scouring), dyeing, finishing and a colour lab
- Both batch (jet) and continuous equipment; BCI's continuous route covers light to dark shades, which suits long-run uniform fabric
- Three QC checkpoints — greige inspection before dyeing, in-process control and inspection at packing — with a 10-point system quality report
- Testing to ISO, JIS, AATCC and Daimaru methods
- OEKO-TEX Standard 100 certification — no restricted substances in the finished fabric
- MOQ is negotiable — it depends on process, shade and order size
Q&A
Q: Can TR be dyed with a single dye class? A: No. The polyester takes disperse dyes (high heat) and the rayon takes reactive or vat dyes. One class leaves the other fibre undyed.
Q: How is TR different from TC, and which should I choose? A: TR uses rayon instead of cotton — softer, smoother and more absorbent, but with slightly lower wet strength and more shrinkage. TC suits work where durability and firmness matter; TR suits work where a soft, neat hand is wanted. BCI dyes both.
Q: Why is the polyester dyed before the rayon? A: The disperse step runs at very high heat (130°C, or 180–220°C thermosol). If the reactive side were dyed first, that heat would destroy the reactive dyes — so the order is disperse first.
Q: Why does TR shrink? A: Rayon (viscose) is more prone to shrinkage and shape loss than cotton, so TR needs finishing such as sanforizing to lock the dimensions before delivery.
Q: What uniform work is TR best for? A: Office, hotel and work uniforms that need a soft, neat, comfortable hand while still standing up to frequent washing — BCI dyes TR for exactly this group.
Q: Can small quantities of TR be dyed? A: MOQ is negotiable — it depends on process, shade and size; small runs can go on the batch (jet) route.
Talk to BCI
Commission TR fabric dyeing from the mill · Uniform fabrics · Contact the team
References
- Physical, Chemical and Mechanical Properties of Viscose Rayon — Textile Learner
- Disperse Dye Exhaust vs. Continuous Dyeing: A Process Guide for Polyester — Skychemi
- Characteristics of Viscose Rayon — Daiwabo Rayon Co., Ltd.
- The Thermosol Story — Joseph W. Gibson Jr. (Olney Medal Address), AATCC
- Standard Test Methods and Procedures — AATCC

