Short answer: what is crocking (rubbing fastness)
Crocking (rubbing fastness) is dye that transfers from a fabric onto skin or another material when they rub together — for example, a dark uniform marking a light inner shirt over a working day. It is measured under ISO 105-X12 or AATCC 8: a machine rubs a white cotton swatch over the sample, and the staining on the swatch is rated 1–5 on a grey scale (5 = no transfer at all)
Why dark fabric marks more
- Dark shades carry more dye — so more unfixed dye sits on the fibre surface
- Fixation decides — if the dye is not fully bonded to the fibre, friction carries it away
- Wet conditions make it worse — water helps dye molecules migrate onto the other surface
- Light colours carry less dye — so they crock less by nature
- Note: crocking is a surface-fixation problem — a fabric can pass washing fastness yet still crock if surface dye is not fixed
How a crocking test works (ISO 105-X12 / AATCC 8)
- A white cotton test swatch (desized, bleached, unfinished) is cut into squares of about 50 mm
- A crockmeter rubs the swatch back and forth over the sample under standard pressure (about 9 N) for 20 rubs
- Two tests — dry rubbing (dry swatch) and wet rubbing (swatch soaked in water)
- The staining on the swatch is graded with a grey scale (ISO 105-A03): 5 = no staining · 4 = very slight · 3 = slight · 2 = distinct · 1 = heavy
Dry rubbing vs wet rubbing
- Dry — measures staining in normal wear: friction against skin, seats and furniture
- Wet — usually grades lower, because water helps the dye migrate; important for workwear that sweats or gets wet
ISO 105-X12 vs AATCC 8
- Same principle: crockmeter + white cotton swatch + grey scale
- They differ in swatch size, applied force and soak level (ISO wet rubbing about 100% uptake · AATCC about 65%)
- Results under the two standards are not always identical for every shade — the spec should name which standard applies
What crocking grade is acceptable
- There is no single mandatory number for every use — state the required grade + standard + test condition in the spec, e.g. "dry rubbing, grade 4, per ISO 105-X12"
- Light shades can usually be specified at a higher grade; dark shades such as navy or black are commonly specified one notch lower
- With the same standard and method, grades are comparable across lots — which is exactly why the spec must name the method
How a dyeing mill keeps crocking low
- Dye to the target shade and fix the dye completely — disperse dyed at full heat until it enters the fibre, reactive fixed with alkali to recipe
- Soaping — washing unfixed dye out of the fibre at heat with detergent
- Finishing steps that add no new dye and do not loosen the surface colour
- QC and testing on every lot — including an in-house rubbing test
Boonchuay Industrial: crocking tested in our own lab
Boonchuay Industrial (BCI) is a dyeing and finishing mill with over 60 years of experience in Nakhon Pathom. Our in-house lab runs the rubbing test (crocking) alongside the rest of the colour-fastness panel:
- Tests to ISO, JIS, AATCC and Daimaru methods
- Lab dyeing that duplicates the factory's real production process (both batch and continuous)
- Three QC checkpoints — greige inspection before dyeing, in-process control and inspection at packing
- 10-point quality report with every lot
- MOQ is negotiable — depends on process, colour and order size
See fabric dyeing from a dyeing mill · our standards and quality control · or contact us
FAQ
Q: What does a crocking grade of 4 mean? A: On the 1–5 scale, 4 = "very slight" transfer — the staining on the swatch is barely visible; 5 = no staining at all. Buyers commonly specify 4 or better for uniforms and apparel.
Q: Does crocking disappear after a few washes? A: If the staining comes from surface dye that was not fixed, proper washing can reduce crocking over washes — but buyers specify the crocking grade from the first lot, not after customer washes.
Q: Which matters more, dry or wet rubbing? A: It depends on the end use — everyday wear and uniforms focus on dry rubbing; workwear that sweats or gets wet should be checked on both, since wet crocking usually grades lower.
Q: If it passes washing fastness, can it still crock? A: Yes — they are different tests. Washing fastness (ISO 105-C06 / AATCC 61) measures colour change after washing; crocking (ISO 105-X12 / AATCC 8) measures transfer by rubbing. A fabric can pass washing and still crock.
Q: How do I specify crocking in a spec sheet? A: Three parts — the grade required (e.g. 4), the standard (ISO 105-X12 dry rubbing), and the test conditions. A dyeing mill testing to the same standard gives results you can compare across lots.

