Short answer: why fabric colour fades or bleeds

Colour bleeding happens when dye has not bonded firmly enough to the fibre, or has not been washed off completely, so that it releases into the water and stains other fabrics or turns the wash water coloured. Fading happens when the dye molecules in the fabric are broken down by ultraviolet light, washing, rubbing or chemicals, so the colour gradually becomes lighter.

The most effective prevention is to put a "named standard + pass grade" for each test into the spec from the start — for example wash fastness to ISO 105-C06, rubbing fastness to ISO 105-X12 and light fastness to ISO 105-B02 — and to choose the dye class that suits the job, such as vat dyes for fabric that must survive heavy washing and strong light.

"Bleeding" and "fading" are two different problems

  • Bleeding is dye moving out of the original fabric to stain other fabric or the water. It is usually excess dye that never bonded to the fibre and was not washed off, or a dye class whose fastness does not fit the use.
  • Fading is the colour becoming lighter because the dye molecules are destroyed. Causes are ultraviolet (UV) light in sunlight, repeated washing, rubbing and chemicals such as chlorine.

A simple way to remember: bleeding = the colour "moves" to something else (the dye is still there, just on the wrong cloth) / fading = the colour is "gone" (the dye molecules are destroyed). The two problems are fixed differently: bleeding is solved in the dyeing and washing-off process and verified with fastness tests, while fading is solved by choosing a dye class with high light fastness and specifying a light-fastness grade for the use.

How sunlight destroys colour

Fading is a chemical process: the structure of the dye molecule is broken down until it no longer reflects the original colour. UV radiation in sunlight is the main destroyer — the longer the fabric is exposed, the more the colour lightens, and the speed depends on the dye class, because some classes are naturally more lightfast than others.

For uses where fabric takes continuous light — uniforms hung near windows, curtains, outdoor goods — specify colour fastness to light to ISO 105-B02 or AATCC 16. Light fastness is rated on the blue wool scale 1–8 (the higher, the more lightfast); agree the grade for the use, and set it higher for window and outdoor uses than for indoor wear. What each grade means, and what grade to require for each use, is covered in the colour fastness guide for buyers.

Why colour comes off in washing, rubbing and sweat

Every "condition of use" has its own named test:

  • Washing — ISO 105-C06 or AATCC 61: the fabric is washed in a standard solution, with the result measured two ways — the change of its own colour and the colour transferred to adjacent fabric.
  • Rubbing (crocking) — ISO 105-X12 or AATCC 8: rubbed with white cloth, dry and wet. This is the test that decides whether a dark shirt will stain a light lining.
  • Perspiration — ISO 105-E04 or AATCC 107: simulates acid and alkaline sweat — important for uniforms and workwear worn all day.
  • Chlorine — for hospital and food-industry uses washed with bleach.

The harsher the use (washed often, washed with agents, exposed to sweat), the more tests you should require, each with a pass grade stated in the spec.

Colour transfer between fabrics: the most common real problem

The most common problem buyers actually face is not fading — it is "the dark colour staining the light one":

  • Washing darks with lights — if the fabric was dyed and washed off properly, a lot that passes its wash-fastness criteria will not bleed even when washed together. A lot that still carries excess dye will transfer colour as soon as it meets water.
  • Wet stacking — damp dark fabric stacked on light fabric can transfer colour — so fabric must be dry before it is packed and shipped.

For the full handling and storage side of this, see the fabric storage and handling article.

Prevention: put "standard + pass grade" in the spec

Example spec lines a buyer can copy straight away:

  • Wash fastness: 4 or better — ISO 105-C06
  • Rubbing fastness (dry/wet): 4 or better — ISO 105-X12
  • Light fastness: blue wool grade agreed for the use — ISO 105-B02 (higher for window or outdoor use)
  • Perspiration fastness: 4 — ISO 105-E04
  • No colour transfer to adjacent fabric in the wash test

A test report without a named standard is a list of floating numbers that cannot be compared across lots or mills — so every spec line must state "standard + pass grade", and the pass grades must be agreed before production starts.

When the fabric arrives, check the test report against the spec pass values and keep a test coupon from the lot for re-testing over the life of the order — see the fabric quality testing article for how BCI runs its testing and issues reports.

Choosing the dye class is where prevention begins

The "inherent" durability of a colour starts with the dye class the mill chooses:

  • Cotton fabric — dyed with reactive dyes, which bond chemically to the fibre, or with vat dyes — the most durable cotton dyes for washing, light and chlorine — making them the main choice for uniforms and workwear (see how vat dyeing works).
  • Polyester fabric — dyed with disperse dyes.
  • Blend fabric (TC, TR and others) — each fibre needs its own dye class and process to match one shade — this is where the mill's experience matters.
  • Dark shades — a common misconception is that "continuous dyeing only does light shades". Modern continuous dyeing covers light to dark shades.

Dyeing cost is driven by the batch size per colour, not by how many colours you order — a mill running both batch (jet) and continuous dyeing can fit volumes from small to large while keeping the shade consistent across lots.

What a reliable dyeing mill tests before delivery

A reliable mill tests the actual production lot, not just laboratory samples:

Boonchuay Industrial (BCI) in Nakhon Pathom has run commission dyeing and finishing for over 60 years, with an in-house laboratory covering washing, light, perspiration, rubbing, chlorine, water and bleeding fastness, plus dimensional stability and tear/tensile strength, tested to ISO, JIS, AATCC and Daimaru.

BCI's QC system checks at three points — the incoming greige fabric, in-process and at packaging — with a 10-point quality report for every lot. For colour, BCI runs a colour laboratory with a spectrophotometer and a multi-source light booth, controlling the shade from the lab dip through the production lots — see all dyeing and finishing services, or contact the BCI team to talk through your spec directly.

FAQ

Q: Do dark colours really bleed more easily than light ones? A: Yes — dark shades carry more dye, so if dye fixation and washing-off are incomplete there is more loose dye available. It is a process problem, not a shade problem — dyed and washed off properly, a dark shade can pass the same wash and rubbing fastness criteria as a light one.

Q: Dark and light garments were washed together and stained — should I question the mill? A: Check the test report first. If the wash and rubbing fastness meet the spec, the problem is in the washing (temperature, detergent, method). If the fastness misses the agreed spec, that is a conversation with the mill — the spec is the pre-agreed agreement.

Q: What is the difference between grade 4 and 4-5? A: Wash, rubbing and perspiration fastness are graded on the grey scale from 1 to 5, with 5 the best and 4-5 the halfway value (light fastness uses the blue wool scale 1–8 instead) — see the colour fastness guide for buyers for the grade each use should require.

Q: The fabric hangs near a window or is used outdoors — what should the spec say? A: State a light fastness grade on the blue wool scale (1–8) to ISO 105-B02, higher than for indoor wear, and choose a dye class that is naturally lightfast — for cotton, vat dyes are the strong choice.

Q: The fabric only bleeds in the first one or two washes — is that a problem? A: Some excess dye can release in the first washes, and that is normal — so judge by the wash fastness measured to ISO 105-C06, not by the feeling after the first wash. If the fabric bleeds again in every wash, it is not meeting criteria and it is a conversation with the mill.

Q: I re-order the same colour months later — will it match? A: It can be controlled if the mill has a real colour system — colour values (L, a, b, delta E) recorded with a spectrophotometer at the lab dip, then every production lot controlled from that reference. BCI uses this system, and MOQ is negotiable — state your quantity and talk it through.

References