Choosing the right uniform fabric starts by defining the real working use of the garment, such as office wear, outdoor work, or a hot humid climate. Then choose the fibre type and the values you need to fit the job, such as TC, TR or 100% cotton, colour fastness, ironing, moisture management and weight (GSM). Stating every value together with the test standard in your spec lets the mill pick the right fabric and lets both sides accept goods against the same criteria.

Choosing by real use

  • Office shirts — low wrinkle, moisture management, neat look
  • Outdoor workwear — light fastness, wash fastness, sweat control
  • Industrial wear — flame retardant, moisture management, soil release
  • Kitchen or canteen wear — water and oil repellent, soil release
  • Field uniforms — anti-mosquito, light fastness
  • Sport or heavy work — moisture management, anti-bacterial

Choosing the fibre type

  • TC (cotton blended with polyester) — durable, easy iron, good value; a main choice for office, hotel and industrial uniforms, alongside TR
  • TR (rayon blended with polyester) — softer, smoother and more comfortable than TC; usually heavier than TC, but a little less durable, because rayon is weaker when wet
  • 100% cotton — breathable and comfortable, but wrinkles and shrinks easily
  • Cotton + spandex — stretchy, manages moisture, ideal for all-day wear
  • Choose by the balance of durability, comfort and ease of care

Stating the colour fastness value

  • State the acceptable class (1–5) for the use; outdoor wear needs a high light-fastness value
  • Test to a named standard method, for example light ISO 105-B02 / AATCC 16.3, wash ISO 105-C06 / AATCC 61, rubbing ISO 105-X12 / AATCC 8, perspiration ISO 105-E04 / AATCC 15, chlorine ISO 105-E01 / AATCC 188
  • State the pass/fail criteria clearly in the spec
  • Test on the real finished fabric, not only a small sample
  • Read more at the colour fastness guide

Ironing and wrinkles

  • Workwear needs easy care fabric
  • State the acceptable wrinkle level
  • Test crease recovery after washing
  • TC and TR irons easier than 100% cotton
  • State the wash cycles the smoothness must survive

Moisture management and comfort

  • A good fabric moves sweat from the skin to the outside quickly and reduces clamminess
  • Test wicking and drying speed to a named standard method (for example AATCC 195)
  • Essential for garments worn all day or for outdoor work in a hot, humid climate

Weight (GSM)

  • GSM is the fabric weight per unit area; it sets how the garment feels
  • Office shirts use a mid value; outdoor or heavy workwear uses a heavier value
  • Too low and the fabric is thin and tears easily; too high and the garment is heavy and hot
  • State the value you need in the spec and ask for the measured result

Shrinkage after washing

  • Test to a named standard method, for example ISO 6330 and ISO 5077 or AATCC 135
  • State the acceptable shrinkage rate
  • Low-shrinkage fabric keeps the garment in size through repeated washing

Lab dip colour and lot planning

  • State the colour code (for example Pantone) clearly
  • Request a lab dip small-dye sample before production
  • The colour must be consistent within the lot and between lots
  • State the total number of colours and the lots per colour
  • Keep a reference sample for the life of the uniform

What to state in the spec

  • Fibre type (and blend)
  • The GSM you need
  • Colour and colour code
  • The colour fastness class with the test method
  • The functional finishes you want (easy care, moisture management, water and oil repellent, flame retardant, anti-mosquito, anti-bacterial)
  • The wash cycles the garment must survive
  • The shrinkage criteria
  • The test standard used
  • The quality-check conditions

Common mistakes

  • Not stating the real use, so the wrong fabric is chosen
  • Stating a GSM without checking durability
  • Testing on a small sample only, not the real finished fabric
  • Not naming the test standard, so results cannot be compared
  • Not asking for a written test report

Boonchuay Industrial (BCI)

Boonchuay Industrial Co., Ltd. (บริษัท บุญช่วยอุตสาหกรรม จำกัด) is a commission dyeing and finishing mill with over 60 years in Sam Phran, Nakhon Pathom. It has an in-house colour lab and in-house testing to international standards (ISO, AATCC, JIS, Daimaru) and issues a 10-point system quality report. To choose uniform fabric, see uniform fabrics or contact the team.

FAQ

Is TC fabric suitable for uniforms Yes. It is durable, easy to iron, easy to care for and good value, so it is a main choice for workwear, alongside TR.

What fastness class should I state It depends on the use. Outdoor wear needs a high light-fastness class; indoor wear needs a mid class. State the acceptable class in the spec together with the test method.

How does GSM affect the garment A higher GSM makes the fabric thicker and more durable, but heavier and hotter; a lower GSM is lighter but tears more easily. State the value that fits the use.

Is TR suitable for uniforms Yes. It is softer, smoother and more comfortable than TC, usually heavier than TC, but a little less durable because rayon is weaker when wet.

Should I test on real fabric A lab dip confirms the colour. For property values such as fastness and shrinkage, test the real finished fabric so the values match the production lot.

References

  • Test Methods and Standards — AATCC. https://www.aatcc.org/testing/standards
  • ISO 105-B02:2014 Textiles — Tests for colour fastness — Part B02: Colour fastness to light — ISO. https://www.iso.org/standard/65209.html
  • OEKO-TEX Standard 100 — OEKO-TEX Association. https://www.oeko-tex.com/en/our-standards/oeko-tex-standard-100/