A soil release finish is a chemical finish that makes stains wash out of fabric more easily during ordinary laundering. It doesn't stop fabric from getting dirty — it makes the stain that's already there come out with a regular detergent. That is why it is specified on uniforms, workwear and hotel linen.
What is a soil release finish?
A soil release finish is a chemical treatment applied to fabric after bleaching/dyeing that makes the surface "more easily wetted by wash water and detergent" during laundering, so soil (dry and oily) releases from the fibre more readily than on untreated fabric.
- Part of chemical finishing, done on bleached or dyed fabric
- BCI offers soil release as one of its chemical finishing options
- Result: easier wash-out, better absorbency, and less soil redeposition during laundering
How does it work?
Mechanisms found in the literature (1974 review, 2014 open-access study):
- Increased hydrophilicity — wash water and detergent penetrate between the soil and the fibre (primary mechanism)
- Dual-action agents (e.g. fluorochemicals) — "repel" in air but swell and switch to a water-wettable surface in the wash bath: repel at wear, release at laundering
- Common chemistries: carboxy-based (acrylic/methacrylic copolymers), CMC, PVA, ethoxy/hydroxy polymers, fluorochemicals — usually with a crosslinker/binder for wash durability
Soil release vs stain repellent
- Soil release — doesn't prevent soiling; makes the stain that's already there easier to wash out
- Stain repellent (water & oil repellent) — keeps liquids from soaking in at the moment of the spill; gives time to wipe before laundering
- Can be combined — repellent + soil release = "repel on contact + easy wash-out"
- Caution — a finish that's too hydrophobic/oleophobic can make oily stains harder to wash; needs balancing
How is soil release tested?
- AATCC TM 130 (Soil Release: Oily Stain Release) — tests an oily stain (corn oil): stain applied, pressed with a standard weight, laundered with the AATCC Standard Reference Detergent, residual stain graded 1–5 against the AATCC Stain Release Replica (5 = fully removed, 1 = heavy residue)
- AATCC TM 215 (Soil Release: Household Soils) — newer standard, tests household soils such as red wine, ketchup, mustard, coffee, grape juice — similar procedure to TM 130
- Buyers should specify the standard + minimum grade + number of launderings in the spec
- BCI's in-house lab tests to ISO, JIS, AATCC and Daimaru standards — put AATCC 130/215 in the spec and confirm the test with the BCI team
Which fabrics need it?
- Uniforms (office/hotel/industrial) — TC and TR
- Workwear/kitchen wear — frequent oil and food soils
- Hotel linen — laundered often, needs easy soil release
- Hospital/medical fabrics
- Home and furniture fabrics
- Anything needing both "stain resistance" and "easy wash-out"
How to write the spec line
Example (adjust to your actual use):
Fabric: TC 65/35, [weight], [colour] · Finish: soil release · Test: AATCC TM 130 (oily), grade [X] after [N] home launderings
(Numbers in brackets are placeholders — agree them with the mill for your actual use)
FAQ
Q: Does soil release mean the fabric never stains? A: No — it makes the stain that's already there easier to wash out. It doesn't prevent the initial stain.
Q: Does it work on blends (TC/TR)? A: Yes — most uniform fabrics are blends; BCI dyes and finishes blends.
Q: How long does the finish last? A: Depends on the chemistry and crosslinking — state the number of launderings you need in the spec and have the mill test to it.
Q: How is it tested? A: AATCC TM 130 (oily) and AATCC TM 215 (household soils) — specify the standard, minimum grade and number of cycles in the spec.
Q: Does BCI do soil release? A: Yes — it's one of our chemical finishing options. Put the AATCC test you need in the spec and confirm it with the BCI team.
Talk to BCI
BCI offers chemical finishing including soil release for uniforms, workwear, hotel linen and home fabrics — at our plant in Nakhon Pathom.
- Chemical finishes including soil release
- In-house lab testing to ISO, JIS, AATCC and Daimaru
- QC: three checkpoints: greige inspection before dyeing, in-process control and inspection at packing
- A 10-point system quality report for every lot
- MOQ is negotiable
See how fabric is tested at BCI for the full testing story, our functional finishes or uniform fabrics, or talk to BCI's fabric dyeing team via the contact page.
References
- AATCC — The AATCC Stain Release Replica — AATCC (standards TM 130, TM 215)
- AAFES — Exchange Test Method A-18: Soil/Stain Release — AAFES
- Venkatesh, Dweltz, Madan, Alurkar (1974) — A Study of the Soiling of Textiles and Development of Anti-Soiling and Soil Release Finishes: A Review — Textile Research Journal
- Dhiman & Chakraborty (2014) — Soil release performance of cotton finished with oleophobol CPR and CMC-Na salt — Fashion and Textiles (Springer, open access)

