Anti-odour (deodorant) fabric uses a finish intended to reduce odour developing during wear. Clothing odour often forms when microbes transform sweat, skin oils and related skin-derived compounds into volatile molecules. The process varies with the wearer, fabric and laundering.
Where fabric odour comes from
According to a peer-reviewed review in Microorganisms (MDPI, 2020), malodour on clothing develops through several biological and chemical steps:
- Sweat and skin oils are the precursors — apocrine glands (armpits, groin) secrete complex molecules such as fatty acids and sulfur-containing amino acids; eccrine sweat is a watery electrolyte solution carrying lactate, urea and ammonium
- Bacteria break these down — the odours people perceive come mainly from sulfur compounds (e.g. 3-methyl-3-mercaptohexan-1-ol, with an onion-like scent and a very low detection threshold), volatile fatty acids, and isovaleric acid formed from the conversion of leucine (the sour, foot-like note)
- Fabric accumulates both the bacteria and the odour molecules — during wear, skin bacteria attach to the fibres and grow selectively, so the fabric develops its own textile microbiome and volatilome, shaped by fibre type, the wearer and the wearing conditions. Research has linked Micrococcus and Moraxella to clothing and washing-machine odour
Do different fibres hold odour differently?
A 2019 review reports a relatively consistent ranking of odour retained in textiles, from least to most: wool, cotton, then polyester and polyamide. Fabric construction, wear and laundering also matter, so test the intended fabric.
- Cotton and wool retain less odour
- Polyester and polyamide retain the most odour
The review notes that fibre type affects how odour compounds are adsorbed and released; it does not establish that every synthetic fabric retains more odour under every condition.
The two main anti-odour strategies
According to a peer-reviewed review in Microorganisms (MDPI, 2021), anti-odour finishing works through two main routes:
- Route 1: reduce or inhibit bacteria — prevents the breakdown of sweat at the source, using antimicrobial agents such as nano silver, metal salts, quaternary ammonium compounds (QACs) or triclosan. In textile finishing, silver is one of the commonly used metal-based agents; its effect depends on formulation, fabric and test conditions, with broad-spectrum activity against both Gram-positive and Gram-negative bacteria
- Route 2: chelate the odour molecules — uses molecules such as cyclodextrins or calixarenes to trap the volatile odour compounds. The review notes that this approach targets odour molecules rather than microbes and can avoid disrupting the skin microbiome; it addresses odour, not its source.
A 2021 review lists six useful criteria for evaluating an antimicrobial textile finish: non-toxic to humans, non-irritating, effective against microorganisms, compatible with textile processing, durable through laundering, and no impact on fabric quality or appearance.
How anti-odour differs from antibacterial
Buyers often use "antibacterial" and "anti-odour" interchangeably, but they are different things:
- Antibacterial — measured by the reduction in bacterial count on the fabric (log reduction). A clear quantitative objective: fewer bacteria on the fabric
- Anti-odour — measured by the reduction in perceived odour, which can come from two routes: reducing the odour-causing bacteria (route 1) or trapping the odour molecules directly (route 2). An anti-odour fabric may not reduce all bacteria, and an antibacterial fabric may not reduce odour much if odour molecules are already embedded in the fabric
In short: antibacterial is one tool that can be used to achieve anti-odour, but anti-odour is a broader objective.
How is it tested?
Antibacterial testing (quantitative):
- ISO 20743:2021 — the standard quantitative test method for determining the antibacterial activity of textile products; three inoculation methods (absorption, transfer, printing); measured by colony plate count or ATP luminescence
- AATCC TM100 — a quantitative method for assessing antibacterial finishes on textile materials
Anti-odour testing (odour-based):
- Sensory panel — a trained panel evaluates odour intensity before and after laundering
- Volatilomics / GC-MS — analysis of the odour volatiles by gas chromatography–mass spectrometry (e.g. isovaleric acid, thioalcohols) for a quantitative comparison of odour compound levels
Specify in the spec: the agreed method + the wash count before testing + the acceptance criterion (e.g. a log reduction for antibacterial, a sensory score or odour-compound level for anti-odour).
What to know before ordering
- Wash durability — performance varies by chemistry and application. State the required wash count and test performance before and after the agreed laundering procedure.
- Resistance — the cited review reports that MRSA may be insensitive to some QACs and that resistance to silver particles has been reported. These findings are agent- and organism-specific; verify the intended performance with the agreed test.
- Environmental impact — antimicrobial agents that wash off can be toxic to aquatic organisms. State any environmental requirements in the spec
- Compatibility with other process chemistry — state the finishing sequence and test compatibility before production
How to specify it in a fabric spec
- Function: anti-odour (deodorant) finish — state the desired route (antibacterial, chelation, or both)
- Chemistry: type (e.g. nano silver, cyclodextrin) and concentration
- Fabric composition and GSM
- Antibacterial test: method (ISO 20743 / AATCC TM100) + wash count + log reduction criterion
- Anti-odour test: sensory panel and/or GC-MS + criterion
- Durability: before-and-after results over the agreed wash count
- Care instructions: follow the treatment supplier’s product-specific instructions and use the same laundering procedure specified for durability testing
Talk to BCI
Boonchuay Industrial (BCI) is a commission dyeing and finishing mill with over 60 years of experience. Its chemical finishing services cover a wide range of functions — see materials and functional finishes for the full list. Its in-house lab tests to ISO, JIS, AATCC and Daimaru, and quality is controlled at three checkpoints: greige inspection before dyeing, in-process control and inspection at packing, with a 10-point system quality report for every lot. Minimum order quantity (MOQ) is negotiable.
If you need an anti-odour function, specify the desired chemistry, the required test and the wash count the function must survive in the spec, and confirm the details with the BCI team.
Explore uniform fabrics, hospital fabrics, commission fabric dyeing and contact the BCI team.
FAQ
What is the difference between antibacterial and anti-odour fabric?
Antibacterial is measured by the reduction in bacterial count on the fabric (log reduction). Anti-odour is measured by the reduction in perceived odour, which can come from reducing bacteria (route 1) or from trapping odour molecules directly (route 2) — the objectives are different.
Why do synthetic fabrics hold odour more than cotton?
A 2019 review reports that wool retains the least clothing odour, followed by cotton, then polyester and polyamide. It links fibre type to how odour compounds are adsorbed and released; fabric structure, wear and laundering also matter.
How is antibacterial activity tested?
ISO 20743:2021 (quantitative, log reduction) and AATCC TM100. State the method and the acceptance criterion in the spec.
Does the antimicrobial finish survive washing?
Partially — state the required wash count in the spec, with a before-and-after test over that wash cycle.
Do hospital fabrics need an antibacterial finish?
It depends on the application. Specify the function, the test (ISO 20743 / AATCC TM100) and the acceptance criteria in the spec, and consult the BCI team.
References
- Biological and Chemical Processes that Lead to Textile Malodour Development — Microorganisms (MDPI), 2020 (mechanism: apocrine precursors, sulfur compounds, isovaleric acid from leucine, textile microbiome)
- The Future of Functional Clothing for an Improved Skin and Textile Microbiome Relationship — Microorganisms (MDPI), 2021 (textile microbiome, antimicrobial finishing, resistance and environmental considerations) (two routes: kill bacteria vs chelate odour molecules; silver as most used antimicrobial; six requirements for finishing agents; resistance and environmental concerns)
- Natural fibres in next-to-skin textiles: current perspectives on human body odour — Discover Applied Sciences, Springer, 2019 (fibre odour retention: wool < cotton < polyester/polyamide)
- ISO 20743:2021 — Textiles — Determination of antibacterial activity of textile products — ISO (quantitative test; three inoculation methods; colony count or ATP luminescence)
- AATCC TM100 — Test Method for Antibacterial Finishes on Textile Materials (AATCC) (AATCC TM100 and other antimicrobial test standards in practice)

