Short answer: how is cotton fabric dyed?
Cotton fabric must go through pretreatment before dyeing — removing the sizing added during weaving and the natural impurities of the fibre — and is then dyed with dyes that can bond to cellulose, mainly in two classes: reactive dyes for most colours, and vat dyes for the most durable ones.
Fastness is not judged by "washing it at home" but tested by named standard methods: wash fastness to ISO 105-C06, rubbing (crocking) to ISO 105-X12 and light fastness to ISO 105-B02.
Why pretreatment comes first
Greige (grey) fabric coming off the loom carries two categories of unwanted material:
- Added during weaving — starch and sizing applied to the warp yarn so it does not break in the loom; if not removed, dye penetrates unevenly
- Natural cotton impurities — waxes, pectins, proteins and soil attached to the fibre, which make the fabric absorb water unevenly and shade off
The standard steps, in order:
- Singeing — burns off loose fibre hairs from the fabric surface (used on fine fabrics)
- Desizing — removes the starch sizes
- Scouring — alkaline boil-off that removes the natural impurities and evens water absorption
- Bleaching — hydrogen peroxide treatment (for white or light-colour work)
- Mercerizing (optional) — concentrated alkali treatment for lustre, higher strength and deeper dye uptake
A dyeing mill that owns its full pretreatment line, from desizing to mercerizing, is the first thing a buyer should check: dye quality starts with pretreatment quality.
What dyes are used on cotton
Cotton is a cellulosic fibre — the dye must be able to bond to cellulose:
- Reactive dyes — form a covalent chemical bond with cellulose directly; the brightest shades and the widest colour range, with good wash fastness. There are cold-dyeing and hot-dyeing chemistries — the cold types are used in the cold pad batch process, which fixes at room temperature and then washes off the unfixed dye (no steaming)
- Vat dyes — applied in a soluble reduced form, then oxidised into an insoluble pigment that is trapped inside the fibre; the most durable class for washing, light and chlorine
- Direct dyes — easy and economical to apply, suited to light shades, but with limited brightness and poor chlorine fastness, requiring after-treatment to reach adequate wash fastness
For the detailed comparison of reactive versus vat dyes, see Vat Dyeing: the most durable colour for cotton.
Reactive vs vat: the two main dye classes on cotton
- Reactive — widest and brightest range, good wash fastness, light fastness varies by dye chemistry, moderate chlorine fastness — "the dyestuff of choice for most end uses" on cotton
- Vat — highest durability across washing, light and chlorine; deep, rich shades suited to work that must keep its colour through many washes, such as workwear
A buyer asking only "what dye do you use?" should therefore ask the sharper question: "which dye class, and which test method proves the fastness?" — the first answer determines the real durability of the colour.
How fastness is measured: name the test method in the spec
"Wash it at home" gives no comparable result — the comparable, named methods are:
- Wash fastness — ISO 105-C06 (AATCC 61), graded on the grey scale 1-5
- Rubbing (crocking) fastness — ISO 105-X12 (AATCC 8), dry and wet
- Light fastness — ISO 105-B02 (AATCC 16), graded on the Blue Wool scale 1-8 (not the grey scale)
- Perspiration fastness — ISO 105-E04 (AATCC 15)
- Water fastness — ISO 105-E01 (AATCC 107)
A good fabric spec states "method + required grade" clearly — for example wash fastness 4 or better to ISO 105-C06 — not just "colour must not run".
Spec lines a buyer can copy
- Pretreatment: desizing, scouring, bleaching (state if mercerizing is required)
- Dye class: reactive or vat (stated per application)
- Wash fastness: grade 4 or better to ISO 105-C06
- Rubbing fastness: 4 or better (dry) / 3-4 (wet) to ISO 105-X12
- Light fastness: 4 or better (Blue Wool) to ISO 105-B02 for any sun-exposed use
- Report: test results for every named method, to ISO / AATCC (or JIS / Daimaru for Japanese work)
Boonchuay Industrial: over 60 years of cotton dyeing
Boonchuay Industrial (BCI) is a commission dyeing and finishing mill in Nakhon Pathom, with over 60 years of experience. BCI's pretreatment line covers singeing, desizing, scouring, bleaching and mercerizing; BCI dyes cotton with both reactive and vat dyes and specialises in vat dyeing. BCI's colour lab has a spectrophotometer, a multi-source light booth and an automatic lab colour dispenser, and trial-dyes in both batch and continuous processes that duplicate the mass-production process — so the colour approved in the lab is the colour production makes. Quality control has three stages — greige inspection before dyeing, in-process control and inspection at packing — with a 10-point system quality report, and the in-house lab tests to ISO, JIS, AATCC and Daimaru. BCI runs batch (jet) and continuous dyeing to fit each volume; minimum order (MOQ) is negotiable, and the finished fabric is certified to OEKO-TEX® Standard 100.
See the fabric dyeing and finishing services page, and monk robe fabrics — cotton and TC are the main choices for that work.
FAQ
How is 100% cotton dyed differently from TC fabric? 100% cotton takes one dye class (reactive or vat). TC (polyester-cotton) must have both fibres dyed — two dye classes — into one matching shade, which needs deeper expertise. Compare in Cotton vs TC vs TR.
Why does cotton fabric shed colour when washed? Usually unfixed dye that was not washed off completely, or a dye class chosen with a wash-fastness grade below the actual use — prevention is to state the test method (ISO 105-C06) and the required grade in the spec.
Which dye class for dark shades such as navy? For dark shades that must survive many washes plus light and chlorine, vat dye is the main choice — BCI specialises in it.
What does mercerizing do? A concentrated alkali treatment that gives cotton lustre, higher strength and deeper dye uptake — state it in the spec when required.
How is "wash fastness" measured — how many washes? Wash fastness is reported as a grade (1-5 on the grey scale) from the ISO 105-C06 method, not a wash count — a home wash is not comparable to the standard test.
Talk to BCI
If you are looking for a dyeing mill that dyes cotton with reactive or vat dyes and reports every test to ISO/JIS/AATCC/Daimaru — contact Boonchuay Industrial at Contact Us.
References
- Textile Dyeing (Dyeing Booklet), CottonWorks (Cotton Incorporated)
- Dyeing Basics, CottonWorks (Cotton Incorporated)
- Ma W, Shen K, Xiang N, Zhang S (2017) Combinative Scouring, Bleaching, and Cationization Pretreatment of Greige Knitted Cotton Fabrics, Molecules 22(12):2235
- ISO 105-C06:2010 Textiles — Tests for colour fastness — Part C06: Colour fastness to domestic and commercial laundering, ISO
- Standard Test Methods and Procedures, AATCC

