What is a multi-functional fabric

A multi-functional fabric is a single cloth that carries more than one function. A buyer may request properties such as water repellency and easy care, but compatibility depends on the chemistry, fibre and construction, and each function must meet its agreed test criteria after laundering. Treat a requested combination as something to verify, not a standard package: agree on the process and tests with the dyehouse before bulk production.

A multi-functional fabric is a single cloth that has received more than one finishing treatment so it has the properties a use requires. Finishing is the step after dyeing that adds properties to cloth beyond colour and hand: chemical finishing uses finishing agents applied to the fabric, while mechanical finishing works physically on the surface. The chemical finishes a commission dyehouse such as BCI offers include water repellent, water and oil repellent, soil release, flame retardant, easy care (wrinkle resistant), quick dry, anti-mosquito/insect repellent and anti-odour; mechanical finishes such as calendering, sanforizing, brushing and raising can be combined with them.

How to evaluate requested function combinations

  • Water and oil repellency — if both properties are required, state a test method and acceptance criterion for each.
  • Soil release — state the soil type and laundering conditions; AATCC TM130 evaluates oily-soil release.
  • For any requested combination, confirm compatibility on the exact fibre and construction and agree on the test plan before bulk production.

There is no standard combination list. The right finishing add-on depends on fibre type, fabric construction and pretreatment (IntechOpen); specify the end-use requirement and verify the proposed combination on the actual fabric before bulk production.

TC and TR are both main uniform fabrics at BCI. Specify the exact fabric and requested finishes, then ask the BCI team to confirm the applicable route and test plan.

How several functions are applied

  • One application route is pad-dry-cure: the cloth passes through a padding bath, is dried and then cured with heat. IntechOpen describes it as one of several finishing application systems.
  • Several functions can go on the cloth in two ways:
  • One bath — agents are mixed in a single bath. Care is needed: chemicals may not be compatible in one bath (IntechOpen).
  • Separate stages — different agents may be applied at separate stages if the chemistry or fabric requires it; the dyehouse selects the route.

The dyehouse decides the sequence and bath layout for the fabric and requested functions. Before bulk production, agree on a production-representative trial and test set. Colour is matched and approved by lab dip, as with other dyeing jobs.

How you know every function is still there

  • A finish is not "applied and permanent" — each function has its own named test method, and it should be re-tested after the cloth is washed the agreed number of times.

Test methods to specify, by function:

  • Water repellency — ISO 4920 (surface wetting, spray test; it measures surface wetting, not rain penetration) — BCI in-house lab
  • Colour fastness to washing — ISO 105-C06 — BCI in-house lab
  • Colour fastness to rubbing — ISO 105-X12 — BCI in-house lab
  • Colour fastness to water — ISO 105-E01 — BCI in-house lab
  • Light fastness — ISO 105-B02 (blue wool 1–8) — BCI in-house lab
  • Dimensional change — AATCC TM135 using its specified laundering procedure — BCI in-house lab
  • Flame-retardant finish — specify a method suited to the end use and confirm the test with the BCI team
  • Antibacterial activity — e.g. AATCC TM147 (parallel-streak method); specify the test and confirm with the BCI team
  • Soil release — e.g. AATCC TM130 (oily-soil release); agree on soil and laundering conditions and confirm with the BCI team
  • Moisture management — AATCC TM195 measures liquid moisture-management properties; specify a separate drying-time method if that is the requirement and confirm it with the BCI team

Wash the cloth per ISO 6330 (domestic washing and drying) for the agreed number of washes, then re-test each function by its own method — the number of washes belongs in the spec, not "wash it a few times". Each function can wear at a different rate, so each is re-tested separately after washing.

BCI's in-house laboratory tests to ISO, JIS, AATCC and Daimaru standards — covering light fastness, water, perspiration, washing and chlorine fastness, water repellency, rubbing, tear/tensile, bleeding and dimensional stability — for any other test method, put it in the spec and confirm the detail with the BCI team.

What a multi-functional fabric spec should include

  • Fibre and construction — cotton, TC, TR, polyester or a blend
  • The list of functions wanted — complete
  • The test method for each function — named standard (ISO / AATCC)
  • The grade/acceptance level of each function — e.g. the spray grade
  • Number of washes before re-testing — agreed together
  • Colour and colour-fastness limits — to the standards
  • Customer-specific certificates or documentation — name the requirements of the end buyer
  • Minimum order — negotiable

Exact figures such as grades and wash counts are agreed per project with the dyehouse. A sample spec line (uniform job):

"Fibre: TC 65/35 — Functions: easy care + water repellency — Water repellency test: ISO 4920, spray grade ≥ ___ (re-test after ___ washes per ISO 6330) — Colour: approved standard, wash fastness ISO 105-C06 grade ___"

Why to talk to the dyehouse directly

The dyehouse decides the application sequence, bath chemistry and test set. BCI (Boonchuay Industrial) is a commission dyeing and finishing house with over 60 years of experience at Sam Phran, Nakhon Pathom. Quality checks follow three checkpoints: greige inspection before dyeing, in-process control and inspection at packing. BCI provides a 10-point system quality report for every lot.

See the functional finishes page and the fabric dyeing and finishing service, then contact the BCI team about your job.

FAQ

  • How many functions can one fabric carry? There is no fixed number — it depends on the compatibility of the chemistries, the fibre, the construction and the pretreatment, and every function must still pass its own test method after the agreed washes.
  • How long do the functions last in washing? It is specified: the cloth is washed per ISO 6330 for the agreed number of washes, then each function is re-tested by its own method. "Wash it a few times" is not a criterion.
  • Do several functions change the hand or the colour of the fabric? The chemical load on the cloth can affect hand and colour — so the combination is checked on a production-representative trial, with hand, colour and each function assessed before bulk production.
  • What if I need a function not on this list? Put the test method you need in the spec and confirm the detail with the BCI team — BCI's in-house lab tests to ISO, JIS, AATCC and Daimaru standards.

Talk to BCI

  • BCI (Boonchuay Industrial) is a commission dyeing and finishing house with over 60 years of experience at Sam Phran, Nakhon Pathom. Multi-functional fabric is part of the full fabric dyeing and finishing service — from greige inspection through dyeing and finishing to the rolled, finished cloth.
  • Send the fabric specification with the list of functions and test methods to the BCI team so the combination's compatibility can be checked — see contact the BCI team.

References