Anti-mosquito fabric uses a chemical finish intended to deter insects or affect them on contact, depending on the chemistry. UF/IFAS notes that permethrin-treated clothing can repel an insect on contact or kill it after contact. Buyers should specify the chemistry, test method and wash durability with the dyeing mill.
How does anti-mosquito fabric work
For factory-treated clothing in the United States, the US EPA says permethrin is the only insect repellent currently used. Permethrin is a synthetic pyrethroid. UF/IFAS summarizes studies of its use on clothing, but protection depends on treatment, coverage and laundering; follow the product label and the treatment specification.
Research figures compiled by UF/IFAS:
- Factory-treated (ready-to-wear) clothing reduces mosquito bites by 37–94%
- In a study against Aedes aegypti (the dengue vector), treated long sleeves and long pants gave a 91% reduction in bites versus untreated clothing, falling to 49% with treated short sleeves and shorts
Clothing is one layer of protection, not a guarantee. The EPA notes that factory-treated garments protect only the skin covered by the clothing; use a repellent labelled for skin on exposed areas for more complete protection.
How many washes does the finish survive
EPA notes that small amounts of permethrin can come off in the wash, so follow the product label and care instructions.
- Some manufacturer labels claim up to 70 washes, while Harvard notes studies in which pre-treated clothing can wear off after about 15 washes. These figures refer to different products and conditions, not a universal lifespan.
- Harvard notes that a 0.5% permethrin spray used on clothing may last about six washes or six weeks; follow the product label.
- EPA says permethrin-treated clothing should be washed separately from untreated clothing. Follow the product label for all other care instructions.
In a fabric spec, state the number of washes the function must survive, together with a before-and-after test over that wash cycle.
How is insect repellency tested
A 2016 review in Fashion and Textiles describes cage and excito-chamber methods for evaluating treated textiles, and notes one study that applied the WHO cone-test procedure originally used for insecticide-treated nets. Agree the exact method and conditions with the testing lab. Specify in the spec:
- the agreed test method and full protocol, including whether it suits the intended fabric and use
- the conditions: test before washing and/or after the agreed number of washes
- the acceptance criterion (bite count versus a control fabric)
Which applications use it
- Uniforms and field uniforms for outdoor work — agriculture, utilities, outdoor trades
- Military dress — the US EPA states that military clothing has been treated with repellents since 1990
- Outdoor and camping apparel — for people who spend long hours outside
The fibre base is flexible: cotton, polyester, and blends such as TC (cotton–polyester) — TC and TR are both main uniform fabrics at BCI.
Boonchuay Industrial (BCI) offers "Anti-mosquito / insects / pollen" finishing among its chemical finishing services, and the materials & functional finishes page on boonchuay.com states that "Anti-mosquito finishing helps deter mosquitoes and insects, making fabrics suitable for outdoor and functional applications." The buyer specifies the desired chemistry and the required test in the spec, and confirms the details with the BCI team.
How to specify it in a fabric spec
- Function: insect-repellent (anti-mosquito) finish
- Chemistry: type and concentration, as agreed with the treatment supplier and product label
- Fabric composition and GSM
- Agreed test method: cage/cone/excito, stating the protocol and the wash count before testing
- Durability: before-and-after test results over the agreed wash count, with acceptance criteria
- Care and safety guidance: follow the product label and instructions for the specific treated fabric. For permethrin-treated fabric, keep cats away until it is completely dry; UF/IFAS notes that permethrin is toxic to cats when wet.
Is it safe
The US EPA says factory-treated clothing is unlikely to pose a significant immediate or long-term hazard under the exposure scenarios it assessed; exposure is low and permethrin is poorly absorbed through skin. This applies to factory-treated clothing products assessed in the United States, not every treatment. Follow the garment hang-tag and local product rules.
- Use permethrin clothing products only as their label directs; do not apply them directly to skin. Use a skin-labelled repellent on exposed areas.
- The EPA’s 2009 exposure and risk assessment included scenarios involving toddlers wearing or mouthing treated clothing and military personnel who wear treated uniforms daily. Separately, EPA says its review of scientific studies found no evidence of reproductive or developmental effects from permethrin exposure; product-specific precautions still apply.
- UF/IFAS summarizes evidence that combining treated clothing with a skin repellent can offer more protection than either approach alone; use each product only as labelled.
Talk to BCI
Boonchuay Industrial (BCI) is a commission dyeing and finishing mill with over 60 years of experience. Insect-repellent finishing (anti-mosquito / insects / pollen) is one of its chemical finishing services. The mill dyes TC, TR, cotton and other uniform fabrics. Its in-house lab tests to ISO, JIS, AATCC and Daimaru, and quality is controlled at three checkpoints: greige inspection before dyeing, in-process control and inspection at packing, with a 10-point system quality report for every lot. Minimum order quantity (MOQ) is negotiable.
Explore materials and functional finishes, uniform fabrics, commission fabric dyeing and contact the BCI team.
FAQ
Does anti-mosquito fabric repel or kill insects?
With permethrin-treated clothing, UF/IFAS says an insect may be repelled on contact or killed after contact. Other treatments can behave differently, so check the product label and test claims.
Can BCI add an anti-mosquito finish to a uniform fabric?
Yes — anti-mosquito / insects / pollen finishing is one of BCI's chemical finishing services. Send the greige with the desired chemistry and test method specified, and confirm the details with the BCI team.
How long does the protection last after washing?
Wash claims and study results differ by product and test conditions. State the required wash count in the spec, then agree a before-and-after test and acceptance criterion with the supplier.
What is the difference between permethrin and DEET?
DEET is a skin repellent; Harvard notes that it does not kill ticks but makes it harder for them to sense a person. DEET can damage some fabrics, including spandex and rayon. Permethrin-treated clothing can repel insects or kill them after contact; do not apply permethrin to skin.
What functions should an outdoor uniform have?
It depends on the job — mosquito/insect repellency, quick dry (moisture management), light water repellency (DWR). Specify each function separately with its own test.
References
- Repellent-Treated Clothing — US EPA (permethrin as the insect repellent used in factory-treated clothing, and the safety assessment)
- Effectiveness, Safety, and Use of Permethrin-Treated Clothing to Prevent Mosquito Bites — UF/IFAS Extension, ENY-2135/IN1467 (2026) (37–94% bite reduction, 91% vs Aedes aegypti, wash durability, safety)
- Preventing Tick Bites — Harvard University (0.5% permethrin lasts six washes, pre-treated clothing wears off after about 15 washes, DEET for skin vs permethrin for clothing)
- Methods of imparting mosquito repellent agents and the assessing mosquito repellency on textile — Fashion and Textiles, Springer, 2016 (cage test, cone test, excito chamber)

